Release Paper, Flat release Paper, Printing and coating cylinders, foils, Paillettes 25 Years

Metallic transferring foil “L” series

Description

Metallic transferring foils of great range of colors, with thermal-adhesive, for hot transferring, to couple on: PU/PVC textile, leathers etc.

Technical characteristics:

Roll of 300 mt – thickness 19 micron – width 1600 mm (or 800 mm on request)
The metallic foil are made from PET as base materials, PU resin as main structure (the film transferred).

Application

The foil is applied by hot pressing.
Used on PU and PVC is supplied ready to be applied with thermal--adhesive sufficient to be coupled on the support.
Used on irregular materials (eg: leather) or surfaces that absorb a lot, we recommend pre-treating the material with a special polyurethane resin so you can get a good coupling of the foil with the material to be laminated.

Working conditions: *

Transferring temperature: 90-110° C for PVC and PU. The pressure is about 10-20 Kg when the transfer foil is laminated to the support.
Different type of PVC, PU, leather or different processing machinery affect on the selection of temperature and speed.

N.B.: Excessive heat involves burning the foil with the consequent loss of gloss.

PET release (protection film)::
for a machine with good cooling effects, PET can be released after lamination.
If the cooling effect is lower, it is advisable to wait for at least 24 hours before to detach PET.

Metallic transferring foil “L” series

Description

Metallic transferring foils of great range of colors, (without thermal-adhesive), for hot transferring, to couple on: PU/PVC textile, genuine leathers etc.

Technical characteristics

Roll of 300 mt – thickness 19 micron – width 1600 mm (or 800 mm on request)
The metallic foil are made from PET as base materials, PU resin as main structure (the film transferred).

Application

The foil is applied by hot pressing, is without thermal--adhesive so that the support to be coupled requires a pretreatment with special polyurethane resins so you can get a good coupling of the foil with the material to be laminated.

Working conditions *

Transferring temperature: 90-110° C for PVC and PU. The pressure is about 10-20 Kg when the transfer foil is laminated to the support.
• Different type of PVC, PU, leather or different processing machinery affect on the selection of temperature and speed.

N.B.: heat involves burning the foil with the consequent loss of gloss.

PET release (protection film):
for a machine with good cooling effects, PET can be released after lamination. If the cooling effect is lower, it is advisable to wait for at least 24 hours before to detach PET.

* 16. Since the machinery and methods differ from customer to customer, the above observations are for reference only. The user must verify the suitability of the product and its method of application by performing laboratory tests before ordering the product.



© 2019 Komet Srl - All right reserved