Release Paper, Flat release Paper, Printing and coating cylinders, foils, Paillettes 25 Years

Transfer film with Design Series “P” - Full transfer

Description

Transfer film with design (with thermal-resins) of various colours, hot stamping on various support like PU/PVC, textile, leather etc..

Technical characteristics

Roll of 250 mt – thickness 25 micron – width 1500 mm.
These types of films using the "PET" as a base material and, as the main structure a special ink makes a design.

Application

The film transfer is applied by hot pressing.
If you need to couple genuine leather or PU is not necessary to be pretreated it with thermal-adhesive since the film has an adhesive. The design is transferred at 110/120° C.

Used on irregular materials (eg: leather) or surfaces that absorb a lot, we recommend pre-treating the material with a special polyurethane resin so you can get a good coupling of the foil with the material to be laminated.

Working conditions

Transferring temperature: 110/120° C.Once you transferred the product wait till it gets cold before removing the film.

Since the machinery and methods differ from customer to customer, the above observations are for reference only. The user must verify the suitability of the product and its method of application by performing laboratory tests before ordering the product


Komet Release Paper No limit to your fantasy


© 2019 Komet Srl - All right reserved